A NODARA tool

Make a custom name keychain and download the STL

Type a name, pick one of five fonts, and Relieve adds a base that follows the shape of the letters plus a ring to hang it. Ready to print in under a minute.

Drop your file here SVG, JPG or PNG · never leaves your browser Choose file

How to make a name keychain

  1. Type the nameOne or more words, on one or more lines. Accents work too.
  2. Pick a font and ringChange the font, the letter spacing and where the ring goes. The outline base joins the letters.
  3. Download and printDownload the STL and slice it. For two colors, swap filament when the base is done.

Available fonts

FontStyleBest for
MontserratExtra-bold sans serifShort names and big letters that print cleanly
PacificoRounded scriptCursive names with joined letters
LobsterCondensed scriptLonger names with a classic touch
Bebas NeueNarrow capitalsBag tags and all-caps labels
RighteousRounded geometricKids' keychains and a retro look

Recommended sizes

For a 0.4 mm nozzle and PLA.

PartSizeWhy
Keychain width45–70 mmFits in your hand and your pocket
Total height (Z)4–5 mmSturdy without wasting filament
Base2 mm, 3 mm marginHolds the letters together and takes a tug
RingØ 10 mm, 5 mm holeFits a standard split ring
Thinnest stroke0.8 mmTwo 0.4 mm lines; turn on “Thicken” if needed

Tips for printing keychains

  • Two colors without an AMS: in your slicer, add a pause or filament change at the layer where the base ends (2 mm with the default settings).
  • Material: PLA is fine for gifts; PETG handles knocks and a hot car better.
  • Infill: 15–20% is plenty; on parts this thin the walls do most of the work.
  • Lots of names: change the text, download, repeat. Your settings stay put between names.

Frequently asked questions

Is the keychain generator free?

Yes. Make and download as many keychains as you like, with no account and no watermarks.

Can I print the keychain in two colors?

Yes. The base and the letters are at different heights: set a filament change in your slicer at the layer where the base ends.

Can I use my own font?

There are five fonts for now. If you need another one, set the text in your design software, convert it to paths and upload the SVG.

Where does the ring go?

Top, left or right. Relieve finds the edge of the part and attaches it automatically; the offset slider moves it along the edge.

Can I add a magnet instead of a ring?

Yes. Use the Holes tool to add a magnet pocket on the underside and turn it into a fridge magnet.

More Relieve tools

SVG to STLTurn logos and icons into 3D parts.Image to STLTrace a JPG or PNG and extrude it.Name keychainType a name and download the keychain.Filament calculatorGrams, meters and cost before you print.